Right-angle transmission gears,Magnetic miter gear,Perpendicular Type
magnetic gear
Original factory, accept visitors
Free design, technical support
Quality assurance, one year warranty
What are cross type magnetic gears?
Cross type magnetic gears, contactless torque transmission. cross type magnetic gears are able to transmit torque between an input and an output shaft without mechanical contact. Due to their contactless torque transmission, magnetic gears are efficient and allow high rotational speeds. Furthermore, they are highly reliable and provide inherent overload protection.
Cross type magnetic gears is non-contact power transmission device by magnetic atraction repulsion force
Since partition wall transmission is possible, it is widely used in clean rooms, food machinery applications, transportation equipment, conveyor, pumps, etc.
The cross type magnetic gears eliminate micro-step vibration or driving noise caused by mechanical gears. Recommended for precision devices handling due to less influence of vibration, no wear-out of gear.
How do cross type magnetic gears work?
The magnetic poles of cross type magnetic gears are tilted, so when they come into contact, they transmit torque at a right angle. This process is demonstrated in the image below.
If this magnetic transmission method is not what you need, you can also find the magnetic transmission method you need through our magnetic transmission product page.
The cross type magnetic gears parameter
Please note:
- BRA: Brackets, A=A6061,S=SUS304
- IRO: Iron ring,C=ENHANCED,X=NORMAL
- FIX: Fixed method: C or A , When O.D>=21mm, optional A or C, O.D <21mm, only A.
- Tor: Torque (Gap:1mm)
Shaft fixing method
Type A
setscrew
Type B
with feather keyway
and setscrew
Type C
clamping hub
single slot with
feather keyway
| Model | (D) O.D | Pole Qty | (d) I.D | Bra | Iro | Fix | Tor | L | l | N | M |
|---|---|---|---|---|---|---|---|---|---|---|---|
| MGS | 13 | 6P | 4,5,6 | A/S | C/X | C/A | 0.012N.m | 15 | 10 | 2.5 | M3 |
| MGS | 16 | 8P | 5,6,8 | A/S | C/X | C/A | 0.025N.m | 13 | 8 | 2.5 | M3 |
| MGS | 16 | 12P | 5,6,8 | A/S | C/X | C/A | 0.015N.m | 13 | 8 | 2.5 | M3 |
| MGS | 18 | 8P | 6,8 | A/S | C/X | C/A | 0.05N.m | 15 | 10 | 2.5 | M3 |
| MGS | 21 | 6P | 6,8,10,12 | A/S | C/X | C/A | 0.13N.m | 21 | 15 | 3 | M4 |
| MGS | 21 | 8P | 6,8,10,12 | A/S | C/X | C/A | 0.11N.m | 21 | 15 | 3 | M4 |
| MGS | 21 | 16P | 6,8,10,12 | A/S | C/X | C/A | 0.07N.m | 21 | 15 | 3 | M4 |
| MGS | 22 | 18P | 6,8,10,12 | A/S | C/X | C/A | 0.07N.m | 18 | 12 | 3 | M4 |
| MGS | 25 | 10P | 6,8,10,12,15 | A/S | C/X | C/A | 0.15N.m | 22 | 15 | 3.5 | M4 |
| MGS | 26 | 8P | 6,8,10,12,15 | A/S | C/X | C/A | 0.2N.m | 21 | 14 | 3.5 | M4 |
| MGS | 26 | 10P | 6,8,10,12,15 | A/S | C/X | C/A | 0.16N.m | 21 | 14 | 3.5 | M4 |
| MGS | 26 | 12P | 6,8,10,12,15 | A/S | C/X | C/A | 0.14N.m | 21 | 14 | 3.5 | M4 |
| MGS | 26 | 20P | 6,8,10,12,15 | A/S | C/X | C/A | 0.05N.m | 21 | 14 | 3.5 | M4 |
| MGS | 28 | 8P | 8,10,12,15 | A/S | C/X | C/A | 0.22N.m | 25 | 17 | 4 | M4 |
| MGS | 29 | 8P | 8,10,12,15 | A/S | C/X | C/A | 0.25N.m | 25 | 17 | 4 | M4 |
| MGS | 30 | 8P | 10,12,15 | A/S | C/X | C/A | 0.31N.m | 25 | 18 | 3.5 | M4 |
| MGS | 30 | 10P | 10,12,15 | A/S | C/X | C/A | 0.28N.m | 25 | 18 | 3.5 | M4 |
| MGS | 32 | 08P | 8,10,12,15,20 | A/S | C/X | C/A | 0.4N.m | 30 | 20 | 5 | M4 |
| MGS | 32 | 10P | 8,10,12,15,20 | A/S | C/X | C/A | 0.32N.m | 30 | 20 | 5 | M4 |
| MGS | 32 | 12P | 8,10,12,15,20 | A/S | C/X | C/A | 0.28N.m | 30 | 20 | 5 | M4 |
| MGS | 32 | 20P | 8,10,12,15,20 | A/S | C/X | C/A | 0.09N.m | 30 | 20 | 5 | M4 |
| MGS | 35 | 08P | 8,10,12,15,20 | A/S | C/X | C/A | 0.55N.m | 32 | 21.5 | 5.25 | M5 |
| MGS | 35 | 10P | 8,10,12,15,20 | A/S | C/X | C/A | 0.45N.m | 32 | 21.5 | 5.25 | M5 |
| MGS | 35 | 12P | 8,10,12,15,20 | A/S | C/X | C/A | 0.36N.m | 32 | 21.5 | 5.25 | M5 |
| MGS | 35 | 18P | 8,10,12,15,20 | A/S | C/X | C/A | 0.36N.m | 32 | 21.5 | 5.25 | M5 |
| MGS | 39 | 08P | 15,17,20 | A/S | C/X | C/A | 0.8N.m | 35.8 | 26.6 | 4.6 | M5 |
| MGS | 39 | 12P | 15,17,20 | A/S | C/X | C/A | 0.58N.m | 35.8 | 26.6 | 4.6 | M5 |
| MGS | 39 | 16P | 15,17,20 | A/S | C/X | C/A | 0.4N.m | 35.8 | 26.6 | 4.6 | M5 |
| MGS | 40 | 16P | 15,20,25 | A/S | C/X | C/A | 0.42N.m | 34 | 24 | 5 | M5 |
| MGS | 42 | 12P | 15,20,25 | A/S | C/X | C/A | 0.74N.m | 30 | 21 | 4.5 | M5 |
| MGS | 42 | 18P | 15,20,25 | A/S | C/X | C/A | 0.42N.m | 30 | 21 | 4.5 | M5 |
| MGS | 45 | 10P | 15,20,25,30 | A/S | C/X | C/A | 1.2N.m | 35 | 25 | 4.5 | M4 |
| MGS | 45 | 12P | 15,20,25,30 | A/S | C/X | C/A | 0.95N.m | 35 | 25 | 4.5 | M4 |
| MGS | 52 | 10P | 20,25,30,35 | A/S | C/X | C/A | 1.45N.m | 37 | 25 | 5 | M5 |
| MGS | 65 | 18P | 20,35,40 | A/S | C/X | C/A | 1.95N.m | 50 | 35 | 7.5 | M5 |
Please Note:
1.Since we are magnetic gear original factory, support customization of different fixing methods.
2.Strong impacts may cause damage and lead to deterioration in magnetic force.
3.The following objects are affected by strong magnetic fields:cellphones.PCs.Watches.Pacemakers.
4.Due to its non-contact design.it is not suitable for extremely high-speed rotation.(Max.speed:1500 rpm).
5.The operating temperature is -20°C-80°C. Since we are an original factory, we can customize it to: -20°C-150°C.
ashleyterrelldoyal –
Alles ist wie in der Beschreibung, Sendungsverfolgung bis zur Lieferung, die Qualit?t ist ausgezeichnet, ich empfehle das Produkt und den Verk?ufer.
jessica –
thank you.